Visit the author's own website at www.dit-dit-dit.com.
Here's a screenshot of a 'hacked' Pluto transmitting a two-tone signal as received by an Airspy HF+ (probably the best SDR you can buy for reception at 145MHz). As you see, the transmission is nice and clean.
Here's the two-tone setting.
Download here [Link].
What's new / changed in 3.0.4:
ADALM-PLUTO transmit and receive support added.
Airspy HF+ support library upgraded to latest release, CPU usage now much lower.
Airspy HF+ supports pre-production units properly, also units with old / original firmware.
ANAN code given a lot of attention, working much better.
bladeRF2 now checks that the frequency is within the supported range.
Lime transmit support added.
Added Pseudo Stereo (ribbon bar, Receive, Mode..., Pseudo Stereo).
Downconverter supports frequencies up to 999.9 GHz.
Frequency database supports a Custom CSV layout.
Frequency display supports frequencies up to 999.9 GHz.
If there are no receivers a warning is displayed.
Signal History - added Slower and Very slow.
Audio buffering logic updated (the way I maintain the buffer between demodulation and the playback / VAC device). This is simpler, cleaner and gives me a good base for the future. See the Playback Buffering page for options.
Audio recording – a check is made that the folder exists before the recording is started.
Fixed spectrum display in Auto mode when input signal is very low / zero.
Fixed crash adjusting the Span (bottom of display).
Fixed crash caused by a change in output device options such as enabling spatial sound.
Fixed obscure bug in the Select Radio user interface.
Fixed SAM demodulation, PLL was not working fast enough.
More visibility/sanity checks when restoring a window position (example: Select Radio).
Obscure fatal bug saving/recalling complex Favourite definitions fixed.
Product name and date now always shown at the top of the main display with all display styles (long-standing MFC bug fixed).
More logic in coding where the program priority is raised when the system starts.
If the signal is muted due to input overload a warning icon is now shown in the status bar, previously just the Auto Mute text was shown. (This caught me out a couple of times).
Interface redesigned, simplified with no loss of functionality.
Now displays correct TX mode in the main window's ribbon bar tooltips.
Now uses fixed point fonts for name and times.
Fixed fatal error selecting a world map which cannot be opened.
External Radio now supports both Rig 1 and Rig 2.
TLE data now has better sanity checking.
Reduced dangling connections on the server.
After 10 days of very interesting programming the pluto project is ready to be released into the wild now that basic transmit support is ready.
Vist the Pluto page on this site [link].
Here's three FM Stereo signals being demodulated along with their RDS.
Here's a screenshot of Pluto receiving FM Stereo.
More information available on the Pluto page [link].
The PlutoSDR is running smoothly with a 6 MHz bandwidth. Plenty more coding needed, but at least it works.
For testing I'm using my 2.4 GHz Wi-Fi signal. Click on the image below for a high resolution image.
Current PlutoSDR status is here [link].