Transmit
Is there anybody out there?
Supported Hardware
The hardware currently supported by SDR Console is shown in the table below.
| Radio | Notes | |
|---|---|---|
| ✓ | Anan 10, 100 | Requires protocol II. Supported, being tested. |
| ✓ | ANAN 10E, 100B | Requires protocol II. Supported, being tested. |
| ✓ | ANAN 100D | |
| ✓ | ANAN 200D | |
| ✓ | ANAN 7000, 8000DLE | Requires protocol II. Supported, being tested. |
| ✗ | bladeRF | |
| ✗ | hackRF | |
| ✓ | Hermes Lite | Version 3.0.15 |
| ✓ | Lime SDR, Mini | Version 3.0.4 |
| ✗ | Ettus B200, B210 | |
| ✗ | Ettus Other | |
| ✓ | Pluto SDR |
List of Services
-
AudioList Item 1
Note: You must have a working microphone, regular data from the microphone driver controls the transmit processing. Check the microphone with the Spectrum window in the Transmit panel.
Adjust the microphone and processor gain.
-
DSP Panel
An overview of all options related to transmit: mode, audio levels, ...
-
ModesList Item 4
Per-mode configuration, AM and CW carrier levels.
-
PTT
Switching the radio into TX via a serial cable.
-
Pure SignalList Item 3
To be added.
-
USB Relays
Switching USB relays for external power amplifier or antenna control.
